Dip Switch Setting - Panasonic KX-TD1232E Installation Manual

8.2.5 Site Survey 8.2.5 Site Survey
DIP-Switch Setting
Channel 1
1 2
Channel 2
1 2
Channel 3
1 2
Note
After unplugging the Cell Station once, set the DIP-Switch as fol-
lows.
1. Switch the Radio Signal Test Switch from OFF to ON.
2. Set the Channel Number Switches as desired.
DIP-Switch
ON
OFF
Channel 4
3 4
Channel 5
3 4
Channel 6
3 4
• To see the signal strength of more than one Cell Station, the channel
for each Cell Station needs to be set.
• Up to eight Cell Stations can be surveyed at the same time. If more
than one Cell Station is in Radio Signal Test mode, each DIP-Switch
channel must be different.
Channel Number Switch
(Default: Channel 0)
1 2 3
Channel 7
1 2 3 4
Channel 8
1 2 3 4
Channel 9
1 2 3 4
DECT Portable Station Section
Radio Signal
Test Switch
4 5 6
1 2
1 2
1 2
3 4
3 4
3 4
8-23