Panasonic KX-TD1232E Installation Manual page 676

811
Description
Selection
Default
Programming
Conditions
44
System Programming
TIE User Codes
Assigns the TIE User Codes and a Class of Service (COS) to each
code. The code COS determines the toll restriction level of the
TIE caller.
• TIE user code number: 01 through 32
• TIE user code: 4 to 10 digits
• COS number: 1 through 8
Code 01=0001 – COS 1
Code 02=0002 – COS 1
Code 03=0003 – COS 1
:
Code 32=0032 – COS 1
1. Enter 811.
Display: User Code
2. Press NEXT.
Display: User Code NO?→
3. Enter a TIE user code number.
To enter user code number 01, you can also press NEXT.
Display example: 01:0001
4. Enter a TIE user code.
To change the current entry, enter the new code.
5. Press to program the COS.
6. Enter a COS number.
To change the current entry, enter the new COS number.
7. Press STORE.
8. To program another user code, press NEXT or PREV, or
SELECT and the desired TIE user code number.
9. Repeat steps 4 through 8.
10. Press END.
• This setting is required if the Trunk (CO line) Security mode is selected
in programs [455] "TIE Security Type".
• Each user code should be unique and composed of eight numerical
digits, 0 through 9.
• You cannot leave an entry empty.
C:1