P Ickup Dialling; P Ower Failure Restart - Panasonic KX-TD1232E Installation Manual

Digital super hybrid system

Hide thumbs Also See for KX-TD1232E:

Table of Contents

ickup Dialling

Programming References

Feature References

Operation References

—User Manual

ower Failure Restart

Allows an extension user to make an outgoing call by going off-

hook, if the user has previously stored the telephone number. This

feature is also known as Hot Line.

• An LD telephone without the "#" button cannot program this feature.

For programming the phone number, replace the LD telephone with a

telephone with the "#" button temporarily.

• The user uses a feature number to enable or disable pickup dialling.

• If the feature is enabled and the user goes off-hook, dial tone is

generated for the waiting time and then dialling starts. During the

waiting time the user can dial another party, overriding the Pickup

Dialling function.

• If the user answers an incoming call or retrieves a call on hold, the

Pickup Dialling feature does not work.

• If the proprietary telephone is provided with PF 12 button, the stored

number of PF12 button is common to the one for Pickup Dialling.

Section 4, System Programming,

[005] Flexible CO Button Assignment

[100] Flexible Numbering, Pickup dialling

[204] Pickup Dial Waiting Time

Station Programming.......................................................User Manual,

Customising the Buttons – Pickup Dialling Button

Operation – Making Calls

Easy Dialling – To a pre-set party by going off-hook (Pickup Dialling)

Returning on electricity, the system restarts the stored data

automatically. Before restarting, the system records the error logs

if necessary.

• If System Connection* is established, the Slave system makes a copy of

the restored data of the Master system.

*: Available for KX-TD1232 only.