4.4
Timer Programming
Description
Selection
Default
Programming
Conditions
Feature References
Inter Digit Time
Assigns the maximum time allowed between digits on an outgoing
toll call. If an extension user fails to dial any digits during this
time, the DTMF receiver is released. This timer applies until the
Toll Restriction check is completed.
Time (seconds): 5 through 30
10 s
1.
Enter 208.
Display: Inter Digit Time
2.
Press NEXT.
Display example: Time:10
3.
Enter the time.
To change the current entry, press CLEAR and the new time.
4.
Press STORE.
5.
Press END.
• This timer is used for toll restriction checking.
• You cannot leave the entry empty.
Section 3, Features,
Toll Restriction
sec
System Programming
208
4-77