Isdn Port Type - Panasonic KX-TD1232E Installation Manual

4.6 CO Line Programming
Description
Selection
Default
Programming
Conditions
Feature References

ISDN Port Type

Assigns the type of each port either CO line or extension line on
ISDN port basis.
• Port number: KX-TD816 – 01 through 04,
KX-TD1232 – 03 through 06, 09 through 12,
( =all ports)
• CO (CO line) / Extension
All ports – CO
1. Enter 422.
Display: ISDN Line Type
2. Press NEXT.
Display: Port NO?→
3. Enter a port number.
To enter a first port number, you can also press NEXT.
Display example: #03:CO
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another port, press NEXT or PREV, or
SELECT and the desired port number.
7. Repeat steps 4 through 6.
8. Press END.
• Port numbers 03 through 06 are for the Master System and 09 through
12 are for the Slave, if available.
• To assign all ports to one selection, press the
case, the display shows the contents programmed for a first port.
• After this assignment, you should reset the system so that this
assignment is effective.
Section 3, Features,
Integrated Services Digital Network (ISDN) Extension
( =all ports)
key in step 3. In this
System Programming
422
4-107