Panasonic KX-TD1232E Installation Manual page 611

8.4 DECT PS System Programming
Description
Selection
Default
Programming
Conditions
Feature References
PS Extension Group Assignment
Assigns each PS to an extension group. Extension groups are used
for Group Call Pickup and Paging – Group
• PS registration number: KX-TD816 – 01 through 16,
• Extension group number: 01 through 16
• Enabl (enable) / Disab (disable)
All PSs – Extension group 01 – Enabl
1. Enter 658.
Display: PS EXT Group
2. Press NEXT.
Display: PS NO?→
3. Enter the PS registration number.
You can also keep pressing NEXT until the desired PS registration
number is displayed.
Display example: PS01:EXG01:Enabl
4. Enter an extension group number.
You can also keep pressing
group number is displayed.
To change the current entry, press CLEAR and enter the new
extension group number.
5. Keep pressing SELECT until the desired selection is displayed.
6. Press STORE.
7. To program another PS, press NEXT or PREV, or SELECT
and the desired PS registration number.
8. Repeat steps 4 through 7.
9. Press END.
• There is a maximum of 16 extension groups. Each PS can only
belong to one group.
• To assign all PSs to one selection, press the
case, the display shows the contents programmed for the PS which has
the lowest PS registration number.
Section 3, Features
Call Pickup, Group
Paging – Group
KX-TD1232 – 01 through 64,
( =all PS registration numbers)
or until the desired extension
key in step 3. In this
Extension Group
DECT Portable Station Section
658
8-53