Panasonic KX-TD1232E Installation Manual page 574

8.2.4 Installing the Unit 8.2.4 Installing the Unit
7. Wired Extension Connection (KX-TD144 only)
A Cell Station Interface Unit (KX-TD144) can support four wired extensions as well as wire-
less extensions.
Use 4-pin plugs to connect the wired extensions.
8-16 DECT Portable Station Section
7-1. Insert the required telephone wires into the holes in the plug.
Press the transparent part into the black part.
Note: Do not peel off the wire coating. Insert the wires all the way.
2
4-pin plug
D1
T
R
D2
7-2. Insert the plug into a jack on the unit.
To extensions
1
Jack
no.
D1
T
20
R
(28)
D2
19
(27)
18
(26)
17
(25)
Connect the ground terminal to
ground.
Note: If other expansion units are
installed, the frame ground connec-
tion is required for only one unit.
D1
T
R
D2