Panasonic KX-TD1232E Installation Manual page 193

Digital super hybrid system

Hide thumbs Also See for KX-TD1232E:

Table of Contents

Connection References

Programming References

• After ISDN assignments, you should reset the system so that the

assignments are effective.

• Class of Service and department code for ISDN port apply to all

terminal equipment on the same S0 bus.

• Each port can be assigned as follows:

*1 and *2: can be either an external or internal ISDN S0 line.

*1: when assigned as internal, the corresponding analog CO ports or

ISDN ports become available.

If the KX-TD286 is installed together with the KX-TD281 or KX-

TD282, it is not possible to assign the same port as an external ISDN S0

line. If it is done, only the port of the KX-TD286 becomes available.

Section 2, Installation

2.4.2 CO Line Connection (Optional Card)

2.4.4 CO Line Connection (Optional Unit)

2.4.7 Internal ISDN S0 Line Connection

System Restart

Section 4, System Programming

[012] ISDN Extension Number Set

[013] ISDN Extension Name Set

[014] Budget Management on ISDN Port

[017] TD286 Extension Number Set

[018] TD286 Extension Name Set

[019] Budget Management on TD286 Port

[109] Expansion Card / Unit Type

[422] ISDN Port Type

[423] ISDN Layer 1 Active Mode

[424] ISDN Configuration

[425] ISDN Data Link Mode

[426] ISDN TEI Mode