Intercept Extension - Day / Night - Panasonic KX-TD1232E Installation Manual

409-410
Intercept Extension — Day / Night
Description
Selection
Default
Programming
Conditions
Feature References
4-96 System Programming
4.6 CO Line Programming
Intercept Routing provides an automatic re-direction of calls which
cannot or have not been answered. These programs set the
destination in both day and night modes for each line group.
• CO line group (TRG) number: 1 through 8,
• Extension number: 2 through 4 digits / Disable (no Intercept Routing)
All CO line groups – Disable — Day / Night
1. Enter a program address (409 for day or 410 for night).
Display example: TRG Intercpt Day
2. Press NEXT.
Display: TRK GRP NO?–>
3. Enter the CO line group number.
To enter CO line group number 1, you can also press NEXT.
Display example: TRG1:Disable
4. Enter an extension number.
To change the current entry, press CLEAR and the new number.
To disable Intercept Routing, press CLEAR.
5. Press STORE.
6. To program another CO line group, press NEXT or PREV, or
SELECT and the desired CO line group number.
7. Repeat steps 4 through 6.
8. Press END.
• You set the extension numbers in program [003] "Extension Number
Set," ISDN extension numbers in program [012] "ISDN Extension
Number Set" and [017] "TD286 Extension Number Set," voice mail
extension numbers in program [127] "Voice Mail Extension Number
Assignment," phantom extension numbers in program [130] "Phantom
Extension Number Assignment" or floating numbers of pagers in
program [813] "Floating Number Assignment." You cannot assign the
floating number of the modem.
• To assign all CO line groups to one selection, press the
this case, the display shows the contents programmed for CO line group 1.
• Program [401] "CO Line Group Assignment" is used to assign each CO
line to a CO line group.
Section 3, Features,
Intercept Routing
( =all CO line groups)
key at step 3. In