User Programming Mode - Panasonic KX-TD1232E Installation Manual

4.1.4 User Programming Mode

Entering the user programming mode
Note
4-12 System Programming
Some programming items are accessible by any display proprietary
telephone user in the system.
The programmable items are manager programs [000] through
[022].
You can access these programs by entering the User Programming
Mode as follows:
Before entering the mode, confirm that:
• Your telephone is on-hook.
• No calls are on hold at your telephone
Press PROGRAM (or PAUSE) +
Password (default: 1234)
After entering the mode, perform the same programming steps as
the system programming steps in each program address.
• If your telephone set does not have a PROGRAM button, substitute it
with the PAUSE button.
• If nothing is entered in five seconds after the PROGRAM (or PAUSE)
button is pressed, it is cancelled.
• The User Password is not shown on the display. The password can be
changed by system programming. Refer to Section 4.3 [120] "User
Password."
• During the programming mode, your extension is treated as a busy
extension.
• Only one proprietary telephone can be in programming mode at any one
time.
+ and enter the User