Panasonic KX-TD1232E Installation Manual page 66

2.4.2 CO Line Connection
8-CO Line Connection with KX-TD181 /
4-CO Line Connection with KX-TD182
KX-TD181
To Terminal Board or Modular
Jacks from the Central Office.
2-30 Installation
Use 4-pin plugs (included) to connect CO lines. There are two
plugs to connect four CO lines for KX-TD816, and four plugs to
connect eight CO lines for KX-TD1232. A single plug is able to
connect two CO lines. Mis-connection may cause the system to
operate improperly. See Section 6.1.2 "Connection" before
connection.
1. Insert required telephone wires into the holes in a plug.
Fix the transparent part into the black part.
Note: Do not strip the wires. Insert the wires all the way into the plug.
A
To the unit ←
B
A
B
2. Insert the plug A into a CO jack B on the card.
(Optional Card)
A
B
A
B
2
1
Jacks for Power
Failure Transfer †
CO 7, CO 8
CO 5, CO 6
CO 3, CO 4
CO 1, CO 2
View of Connector
B
A
← From Network
A
CO 2
B
A
CO 1
B