4.3
System Programming
Description
Selection
Default
Programming
Conditions
Feature References
Adjust Time
Used to set the time for checking the normality of the system.
Every day at the programmed time, system data is checked. If an
error is checked, it is recorded onto error log.
• Hour: 1 through 12
• Minute: 00 through 59
• AM / PM
1:00 AM
1.
Enter 115.
Display: Adjust Time
2.
Press NEXT to program hour.
Display example: 1:00
3.
Enter the hour.
To change the current entry, press CLEAR and the new hour.
4.
Press
to program minute.
5.
Enter the Minute.
To change the current entry, enter the new minute.
6.
Press
to program AM / PM.
7.
Press SELECT for AM or PM.
8.
Press STORE.
9.
Press END.
You cannot leave the entry empty.
None
AM
System Programming
115
4-55