Panasonic KX-TD1232E Installation Manual page 472

603-604
DIL 1:N Extension and Delayed Ringing — Day / Night
Conditions
Feature References
4-130 System Programming
4.8 Extension Programming
8. Repeat steps 4 through 7.
9. Press END.
• An extension can be assigned as the destination of as many CO lines as
is required.
• In the case of KX-TD1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available. Jack
numbers in the out-of-service system are unacceptable.
• For an explanation of jack numbering, see "Rotation of jack number"
on page 4-7.
• To assign all jacks or all CO lines to one selection, press the
step 3 or step 4. In these cases, the display shows the contents
programmed for Jack 01 or for CO01.
• There are six notification methods:
(1) Immediate ringing: rings immediately
(2) 2 ring delay
(3) 4 ring delay
(4) 6 ring delay
(5) 8 ring delay
(6) No ring: only the indicator flashes
(7) Disable: no incoming call
• When you change the jack number by pressing NEXT or PREV, the
CO line number is not changed. Example #03-1:CO06.....Press
NEXT.....#03-2:CO06
Section 3, Features,
Direct In Lines (DIL)
Night Service
Ringing, Delayed
(contd.)
key at