Panasonic KX-TD1232E Installation Manual page 609

8.4 DECT PS System Programming
PS Charge Verification Assignment
Description
Selection
Default
Programming
Conditions
Feature References
Assigns the PS which is allowed to refer or clear the charge
information on the extension, CO line, account code, and total.
• PS registration number: KX-TD816 – 01 through 16,
• Enable / Disable
All PSs – Enable
1. Enter 656.
Display: PS Charge Refer
2. Press NEXT.
Display: PS NO?→
3. Enter the PS registration number.
You can also keep pressing NEXT until the desired PS registration
number is displayed.
Display example: PS01:Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another PS, press NEXT or PREV, or SELECT
and the desired PS registration number.
7. Press END.
• To assign all PSs to one selection, press the
case, the display shows the contents programmed for the PS which has
the lowest PS registration number.
Section 3, Features
Charge Fee Reference
KX-TD1232 – 01 through 64,
( =all PS registration numbers)
key in step 3. In this
DECT Portable Station Section
656
8-51