Panasonic KX-TD1232E Installation Manual page 445

4.6 CO Line Programming
Description
Selection
Default
Programming
Conditions
Feature References
TD286 ISDN Port Type
Assigns the type of each port either CO line or extension line on a
TD286 ISDN port basis.
• Port number: KX-TD816 – 01 through 06,
KX-TD1232 – 01 through 12,
( =all ports)
• CO (CO line) / Extension
All ports – Extension
1. Enter 440.
Display: TD286 Line Type
2. Press NEXT.
Display: Port NO?→
3. Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:Extension
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another port, press NEXT or PREV, or
SELECT and the desired port number.
7. Repeat steps 4 through 6.
8. Press END.
• For the KX-TD816, port numbers 05 and 06 are fixed as "Extension."
• For the KX-TD1232, port number 01 through 06 are for the Master
System and 07 through12 are for the Slave, if available.
• To assign all ports to the same selection, press the
this case, the display shows the contents programmed for the first port.
• After this assignment, you should reset the system so that this
assignment is effective.
Section 3, Features,
Integrated Services Digital Network (ISDN) Extension
key in step 3. In
System Programming
440
4-113.4