2-6-2] Numbering Plan-Quick Dial - Panasonic KX-TDA200 Programming Manual

4.9 [2-6-2] Numbering Plan—Quick Dial
Quick Dialing numbers are used to call extensions or outside parties, or access certain features without having
to dial their full numbers. It is possible to register Quick Dialing numbers that overlap with other registered
numbers (refer to "Automatic Rerouting of VoIP Calls to Public CO Lines" in the Feature Manual).
A maximum of 80 Quick Dialing numbers can be programmed. When an EMEC/MEC card is installed in the
PBX, a maximum of 4000 (with the KX-TDA100/KX-TDA200/KX-TDA600) or 1000 (with the KX-TDA50) Quick
Dialing numbers can be programmed. To display other sets of numbers, click the applicable tab.
For more information on flexible numbering, see "6.1.4 Flexible Numbering/Fixed Numbering" in the Feature
Manual.
Use quick dial for rerouting to public CO when TIE line does not work
Specifies whether to check if the quick dial numbering plan is compatible (does not overlap) with the main
numbering plan.
Default
Disable
Value Range
Disable: Checks whether the quick dial numbering plan is compatible with the main numbering plan.
Enable: Does not check whether the quick dial numbering plan is compatible with the main numbering plan.
Maintenance Console Location
4.9 [2-6-2] Numbering Plan—Quick Dial
Programming Manual References
None
Feature Manual References
13.1.23 Private Network Features—VoIP (Voice over Internet Protocol)
6.1.4 Flexible Numbering/Fixed Numbering
14.1.1 Quick Dialing
Dial
Specifies the Quick Dialing number.
Default
Not stored.
Value Range
Basic Memory: Max. 4 digits (consisting of 0–9, *, and #)
MEC expansion memory: Max. 8 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-2] Numbering Plan—Quick Dial
Document Version 2008-11
4.9 [2-6-2] Numbering Plan—Quick Dial
PC Programming Manual 305