System Speed Dialing Number Set - Panasonic KX-TD1232AL User Manual Addendum

3.2 User Programming (Manager Programming)
Description
Selection
Default
Programming
Conditions

System Speed Dialing Number Set

Used to program the System Speed Dial numbers. These numbers are
available to all extension users. The stored numbers are also applied to
CO Incoming Call Information Display / Log features.
• Speed dial number: 000 through 499
• Telephone number: 24 digits (max.)
All speed dial numbers – Not stored
1. Enter 001.
Display: SPD Number Set
2. Press NEXT.
Display: SPD-Code?->
3. Enter a speed dial number.
To enter speed dial number 000, you can also press NEXT.
Display example: 000: Not Stored
4. Enter a telephone number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
5. Press STORE.
6. To program another speed dial number, press NEXT or PREV, or
SELECT and the desired speed dial number.
7. Repeat steps 4 through 6.
8. Press END.
• There is a maximum of 500 speed dial numbers. Each speed dial number
has a maximum of 24 digits. The valid characters are 0 through 9,
# keys, RECALL, PAUSE, SECRET and – (hyphen) buttons.
– To store the register recall signal, press RECALL.
Note : The stored recall will be in effect only during an established
call.
(Refer to the Installation Manual, Section 3 "External
Feature Access.")
001
, and
33