2-6-2] Numbering Plan-Quick Dial - Panasonic KX-TDA50 Pc Programming Manual

Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.9.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.11.9 [4-1-7] Wired Extension—Simplified Voice Message
2.11.16 [4-2-5] Portable Station—Simplified Voice Message
Feature Manual References
1.16.5 SVM (Simplified Voice Message)
Other PBX Extension
Other PBX extension numbers can be used to easily call extensions connected to PBXs at different
locations in a TIE line network. The leading numbers of all PBXs in the network that will be called
should be entered in this table. A maximum of 16 leading numbers can be programmed.
Dial
Specifies the leading extension number of the other PBX.
Default
Not stored.
Value Range
Max. 3 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.9.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.16.1 [9-1] TIE Table—Leading Number
Feature Manual References
1.13.13 PRIVATE NETWORK FEATURES
2.9.9 [2-6-2] Numbering Plan—Quick Dial
Quick Dialing numbers are used to call extensions or outside parties, or access certain features
without having to dial their full numbers. It is possible to register Quick Dialing numbers that overlap
with other registered numbers (refer to "Automatic Rerouting of VoIP Calls to Public CO Lines" in
the Feature Manual).
A maximum of 80 Quick Dialing numbers can be programmed. When an EMEC/MEC card is installed
in the PBX, a maximum of 4000 (with the KX-TDA100/KX-TDA200/KX-TDA600) or 1000 (with the KX-
TDA50) Quick Dialing numbers can be programmed. To display other sets of numbers, click the
applicable tab.
2.9 [2] System
PC Programming Manual 279