H3C S3610-28P Operation Manual page 70

Operation Manual – Login
H3C S3610&S5510 Series Ethernet Switches
Figure 4-3 Call the modem
Step 5: Provide the password when prompted. If the password is correct, the prompt
(such as <H3C>) appears. You can then configure or manage the switch. You can also
enter the character ? at anytime for help. Refer to the following chapters for information
about the configuration commands.
Note:
If you perform no AUX user-related configuration on the switch, the commands of level
3 are available to modem users. Refer to the System Maintenance and Debugging
module for information about command level.
Chapter 4 Logging in Using Modem
4-5