Controlling Web Users By Source Ip Addresses; Disconnecting A Web User By Force - H3C S3610-28P Operation Manual

Operation Manual – Login
H3C S3610&S5510 Series Ethernet Switches

8.4.2 Controlling Web Users by Source IP Addresses

Controlling Web users by source IP addresses is achieved by applying basic ACLs,
which are numbered from 2000 to 2999.
Enter system view
Create a basic ACL or
enter basic ACL view
Define rules for the ACL
Quit to system view
Apply the ACL to control
Web users

8.4.3 Disconnecting a Web User by Force

The administrator can disconnect a Web user by force using the related command.
Disconnect a Web user by
force
8.4.4 Configuration Example
I. Network requirements
Only the users sourced from the IP address of 10.110.100.52 are permitted to access
the switch.
To do...
system-view
acl number acl-number
[ match-order { config |
auto } ]
rule [ rule-id ] { permit |
deny } [ source
{ sour-addr sour-wildcard |
any } | time-range
time-name | fragment |
logging ]*
quit
ip http acl acl-number
To do...
free web-users { all |
user-id user-id |
user-name user-name }
Use the command...
Use the command...
8-8
Chapter 8 Controlling Login Users
Remarks
—
As for the acl number
command, the config
keyword is specified by
default.
Required
—
Optional
Remarks
Required
Execute this command in
user view.