H3C S3610-28P Operation Manual page 265

Operation Manual – MSTP
H3C S3610&S5510 Series Ethernet Switches
II. Network diagram
Eth 1/0/1
Switch A
Figure 1-14 Network diagram for tagging BPDUs
III. Configuration procedure
1) Configuration on Switch A
# Configure an MST region.
<Switch A> system-view
[Switch A] stp region-configuration
[Switch A-mst-region] region-name abc
[Switch A-mst-region] instance 1 vlan 10
[Switch A-mst-region] instance 2 vlan 20
[Switch A-mst-region] active region-configuration
[Switch A-mst-region] quit
# Enable the function of tagging BPDUs on Ethernet 1/0/1 and Ethernet 1/0/2 of Switch
A.
[Switch A] interface Ethernet 1/0/1
[Switch A-Ethernet1/0/1] stp bpdu-tagged
[Switch A-Ethernet1/0/1] quit
[Switch A] interface Ethernet 1/0/2
[Switch A-Ethernet1/0/2] stp bpdu-tagged
[Switch A-Ethernet1/0/2] quit
2) Configuration on Switch B
# Configure an MST region.
<Switch B> system-view
[Switch B] stp region-configuration
[Switch B-mst-region] region-name abc
[Switch B-mst-region] instance 1 vlan 10
[Switch b-mst-region] instance 2 vlan 20
[Switch B-mst-region] active region-configuration
[Switch B-mst-region] quit
VPN
Eth 1/0/2 Eth 1/0/3
Switch B
Eth 1/0/4
1-59
Chapter 1 MSTP Configuration