H3C S3610-28P Operation Manual page 72

Operation Manual – Login
H3C S3610&S5510 Series Ethernet Switches
<H3C> system-view
[H3C] interface vlan-interface 1
[H3C-Vlan-interface1] ip address 10.153.17.82 255.255.255.0
Step 2: Configure the user name and the password for the Web-based network
management system.
# Configure the user name to be admin.
[H3C] local-user admin
# Set the user level to level 3.
[H3C-luser-admin] service-type telnet level 3
# Set the password to admin.
[H3C-luser-admin] password simple admin
Step 3: Establish an HTTP connection between your PC and the switch, as shown in
the following figure.
Figure 5-1 Establish an HTTP connection between your PC and the switch
Step 4: Log into the switch through IE. Launch IE on the Web-based network
management terminal (your PC) and enter the IP address of the management VLAN
interface of the switch (here it is http://10.153.17.82). (Make sure the route between the
Web-based network management terminal and the switch is available.)
Step 5: When the login interface (shown in
and the password configured in step 2 and click <Login> to bring up the main page of
the Web-based network management system.
Figure 5-2 The login page of the Web-based network management system
5.3 Web Server Shutdown/Startup
You can shut down or start up the Web server.
Chapter 5 Logging in Through Web-based Network
Figure 5-2) appears, enter the user name
5-2
Management System