H3C S3610-28P Operation Manual page 46

Operation Manual – Login
H3C S3610&S5510 Series Ethernet Switches
The history command buffer can store up to 20 commands.
The timeout time of the AUX user interface is 6 minutes.
II. Network diagram
Figure 2-7 Network diagram for AUX user interface configuration (with the
authentication mode being scheme)
III. Configuration procedure
# Enter system view.
<H3C> system-view
# Create a local user named guest and enter local user view.
[H3C] local-user guest
# Set the authentication password to 123456 (in plain text).
[H3C-luser-guest] password simple 123456
# Set the service type to Terminal, Specify commands of level 2 are available to the
user logging into the AUX user interface.
[H3C-luser-guest] service-type terminal level 2
[H3C-luser-guest] quit
# Enter AUX user interface view.
[H3C] user-interface aux 0
# Configure to authenticate the user logging in through the Console port in the scheme
mode.
[H3C-ui-aux0] authentication-mode scheme
# Set the baud rate of the Console port to 19,200 bps.
[H3C-ui-aux0] speed 19200
# Set the maximum number of lines the screen can contain to 30.
[H3C-ui-aux0] screen-length 30
# Set the maximum number of commands the history command buffer can store to 20.
Chapter 2 Logging in Through the Console Port
2-18