Enabling Reception Of Directed Broadcasts To A Directly Connected Network; Enabling Forwarding Of Directed Broadcasts To A Directly Connected Network - H3C S3610-28P Operation Manual

Operation Manual – IP Addressing and Performance
H3C S3610&S5510 Series Ethernet Switches
2.2.1 Enabling Reception of Directed Broadcasts to a Directly Connected
Network
If a device is enabled to receive directed broadcasts, the device will determine whether
to forward them according to the configuration on the outgoing interface.
Follow these steps to enable the device to receive directed broadcasts:
Enter system view
Enable the device to
receive directed
broadcasts
2.2.2 Enabling Forwarding of Directed Broadcasts to a Directly Connected
Network
Follow these steps to enable the device to forward directed broadcasts:
Enter system view
Enter interface view
Enable the interface to
forward directed
broadcasts
Note:
You can reference an ACL to forward only directed broadcasts permitted by the
ACL.
If you execute the ip forward-broadcast acl command on an interface repeatedly,
the last execution overwrites the previous one. If the command executed last time
does not include the acl acl-number, the ACL configured previously will be
removed.
To do...
system-view
ip forward-broadcast
To do...
system-view
interface interface-type
interface-number
ip forward-broadcast
[ acl acl-number ]
Chapter 2 IP Performance Configuration
Use the command...
Use the command...
2-2
Remarks
—
Required
By default, the device is
disabled from receiving
directed broadcasts.
Remarks
—
—
Required
By default, the device is
disabled from forwarding
directed broadcasts.