H3C S3610-28P Operation Manual page 104

Operation Manual – VLAN
H3C S3610&S5510 Series Ethernet Switches
Port priority: 0
Last 300 seconds input:
Last 300 seconds output:
Input (total):
Input (normal):
Input:
Output (total): - packets, - bytes
Output (normal): 0 packets, 0 bytes
Output: 0 output errors, - underruns, - buffer failures
The output above shows that:
The port is a Trunk port (Port link-type: trunk).
The default VLAN is VLAN 100 (PVID: 100).
The port permits packets of VLAN 2, VLAN 6 through VLAN 50, and VLAN 100
(VLAN permitted: 2, 6-50, 100).
So the configuration is successful.
0 packets/sec 0 bytes/sec
0 packets/sec 0 bytes/sec
- packets, - bytes
- broadcasts, - multicasts
0 packets, 0 bytes
0 broadcasts, 0 multicasts
0 input errors, 0 runts, 0 giants, - throttles
0 CRC, 0 frame, 0 overruns, 0 aborts
- ignored, - parity errors
- broadcasts, - multicasts, - pauses
0 broadcasts, 0 multicasts, 0 pauses
0 aborts, 0 deferred, 0 collisions, 0 late collisions
- lost carrier, - no carrier
1-17
Chapter 1 VLAN Configuration