Displaying Web Users - H3C S3610-28P Operation Manual

Operation Manual – Login
H3C S3610&S5510 Series Ethernet Switches
To do...
Enter system view
Shut down the Web
server
Start the Web server

5.4 Displaying Web Users

After the above configurations, execute the display command in any view to display
the information about Web users, and thus to verify the configuration effect.
Table 5-2 Display information about Web users
Display information about Web users
Use the command...
system-view
undo ip http enable
ip http enable
To do...
5-3
Chapter 5 Logging in Through Web-based Network
—
Required
Execute this command in system
view.
The Web server is started by
default.
Required
Execute this command in system
view.
Use the command...
display web users
Management System
Remarks