Under development
Preliminary specification
Specifications in this manual are tentative and subject to change.
R8C/11 Group
13.1.3 Continuous Receive Mode
The unit is configured to continuous receive mode by setting the U0RRM bit in the UCON register to
"1" (enabling continuous receive mode). In this mode, reading the U0RB register enables data recep-
tion without resetting dummy data to the U0TB register. When the U0RRM bit is set to "1", avoid
writing dummy data to U0TB register in a program.
Rev.0.91
2003 Sep 08
page 118 of 184
13.1 Clock Synchronous Serial I/O Mode