Chapter 10. Interrupt; Interrupt Overview; Type Of Interrupts - Renesas M16C FAMILY Hardware Manual

Under development
Preliminary specification
Specifications in this manual are tentative and subject to change.
R8C/11 Group
10. Interrupt

10.1 Interrupt Overview

10.1.1 Type of Interrupts

Figure 10.1 shows types of interrupts.
Software
(Non-maskable interrupt)
Interrupt
Hardware
Notes:
1. Peripheral function interrupts are generated by the peripheral functions built in the microcomputer system.
2. Avoid using this interrupt because this is a dedicated interrupt for development support tools only.
Figure 10.1 Interrupts
• Maskable Interrupt: An interrupt which can be enabled (disabled) by the interrupt enable flag (I flag) or
• Non-maskable Interrupt: An interrupt which cannot be enabled (disabled) by the interrupt enable flag
Rev.0.91 2003 Sep 08
Special
(Non-maskable interrupt)
Peripheral function
(Maskable interrupt)
whose interrupt priority can be changed by priority level.
(I flag) or whose interrupt priority cannot be changed by priority level.
page 47 of 184
Undefined instruction (UND instruction)
Overflow (INTO instruction)
BRK instruction
INT instruction
Watchdog timer
Oscillation stop detection
Voltage detection
2
Single step
Address match
1
10.1 Interrupt Overview