Repeat Mode - Renesas M16C FAMILY Hardware Manual

Under development
Preliminary specification
Specifications in this manual are tentative and subject to change.
R8C/11 Group

14.2 Repeat Mode

In repeat mode, the input on one selected pin is A-D converted repeatedly. Table 14.3 lists the speci-
fications of repeat mode. Figure 14.5 shows the ADCON0 and ADCON1 registers in repeat mode.
Table 14.3 Repeat Mode Specifications
Item
Function
Start condition
Stop condition
Interrupt request generation timing
Input pin
Reading of result of A-D converter
Rev.0.91 2003 Sep 08
Input voltage on one pin selected by CH2 to CH0 and ADGSEL0 bits is A-D
converted repeatedly
Set ADST bit to "1"
Set ADST bit to "0"
None generated
One of AN to AN
0
Read AD register
page 129 of 184
Specification
, as selected
11
14. Repeat mode