Allied Telesis x510-28GTX Command Reference Manual page 108

F C M
ILE AND ONFIGURATION ANAGEMENT
Similarly, you can specify the USB storage device base directory with usb or usb:
or usb:/
You cannot name a directory or subdirectory flash, nvs, usb, card, tftp, scp, sftp
or http. These keywords are reserved for tab completion when using various file
commands.
In a stacked environment you can only access flash and nvs using the stack
member filepath (e.g. dir awplus-2/flash:/). To access a USB storage
device on a backup stack member, use the
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50170-01 Rev B
C
OMMANDS
"autoboot enable" on page 110
"boot config-file" on page 111
"boot config-file backup" on page 113
"boot system" on page 114
"boot system backup" on page 116
"cd" on page 117
"copy (filename)" on page 118
"copy current-software" on page 120
"copy debug" on page 121
"copy running-config" on page 122
"copy startup-config" on page 123
"copy zmodem" on page 124
"create autoboot" on page 125
"delete" on page 126
"delete debug" on page 127
"dir" on page 128
"edit" on page 130
"edit (filename)" on page 131
"erase factory-default" on page 132
"erase startup-config" on page 133
"ip tftp source-interface" on page 134
"ipv6 tftp source-interface" on page 135
"mkdir" on page 136
"move" on page 137
"move debug" on page 138
"pwd" on page 139
"rmdir" on page 140
"show autoboot" on page 141
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
remote-login command.
108