Samsung DCS Programming Manual page 92

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 212
FOR: DCS CII
Purpose: Determines which devices will be alerted when an alarm sensor is activated.
Devices can be stations or station groups.
Devices will ring like a doorphone and follow the door ring time-out. When ringing, dis-
play keysets show the display assigned in
the keyset display gives an option to clear the alarm. Ringing initiated by an alarm sen-
sor is answered by going off-hook and on-hook again at a ringing keyset.
If a device such as Ring Over Page or a common bell is the only device assigned to ring,
it may be answered by assigning a direct pickup key with this device as the extender. If
the alarm is unanswered by the door ring time-out, ringing will cease but the display will
remain until cleared by dialling the alarm clear feature code and passcode (default
8765).
For DCS and CII systems
ACTION
1. Open programming and select 212
Display shows first sensor (e.g. 3501)
2. Dial sensor number (e.g., 3502 or 352)
OR
Press VOLUME keys to scroll through sensor
numbers and press RIGHT soft key to advance
cursor
3. Enter destination for day (e.g., 205)
OR
Press VOLUME keys to make selection and press
RIGHT soft key to advance cursor
Select night destination in the same way
4. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
ALARM RINGING STATION
iDCS100
All sensors ring 500 day/night
See Related Items, below
MMC 212 (Page 1 of 2)
MMC 213, Alarm Message. The bottom line of
DISPLAY
[3501]ALARM RING
D:500
[3502]ALARM RING
D:500
[3502]ALARM RING
D:205
MMC PROGRAMS
FEBRUARY 2004
N:500
N:500
N:500