Samsung DCS Programming Manual page 250

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 707
FOR:
Purpose: Sets up authorisation codes on a per-class of service basis. The number of
codes (entries) allowed and the maximum number of digits per entry are shown in the
table.
DCS
250
No. of
(001–250)
entries
No. of
4
digits
ACTION
1. Open programming and select 707
Display shows
2. Dial code entry number (see above) including any
leading zeros (e.g., 05 or 005)
OR
Press VOLUME keys to selected index number
and press RIGHT soft key to move cursor
3. Enter authorisation code (e.g., 1234) and press
RIGHT soft key to move cursor
4. Enter class of service number 01–30 (e.g., 05)
OR
Press VOLUME keys to select COS and press
RIGHT soft key to select and return to step 2
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
ALL SYSTEMS
CI / CII 816
100 30
(001–200) (01–30)
4 4
None
MMC 305 Assign Forced Code
MMC 707 (Page 1 of 1)
AUTHORISATION CODE
408/408i
iDCS100
10 250
(01–10) (001–250)
4 4
DISPLAY
AUTHOR.CODE(001)
CODE:
AUTHOR.CODE(005)
CODE:_
AUTHOR.CODE(005)
CODE:1234 COS:01
AUTHOR.CODE(005)
CODE:1234 COS:05
MMC PROGRAMS
FEBRUARY 2004
iDCS500 iDCS500
'M' 'L'
250 500
(001–250) (001–500)
4 4–10
COS:01
COS:01
OS500
500
(001–500)
4–10