Samsung DCS Programming Manual page 89

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
FEATURE DESCRIPTION
REDIAL REVW If ON, when the Redial or LNR key is pressed, keyset users can review previ-
ously dialled numbers in the display and select numbers to redial.
ISDN KEYFAC If ON, allows Keypad Facility messages to be sent to the exchange to invoke
network features
CHK SPV
Checks the supervision signals on an analogue trunk, such as disconnect
TRK
clear or polarity reversal.
PRE FWD
Enables preset forward for busy stations.
BUSY
ORG DIAL
If ON, all dialled digits (including errors) are saved.
LOG
TIE TRSF
If ON, no answer recall is available for calls transferred to tie line.
RCL
VOIP
Enables ring back tone, provided by system, on VoIP calls.
REALRBT
PROG.2 Converts a received Progress message to an Alert message when tandem
ALERT switching.
VOIP VIR RBT If ON, the local system will generate Ring Back tone when the remote system
sends the Alerting message.
PRESET BUSY If ON, will change the preset Forward condition in
Answer to Forward Busy/No Answer.
DCS / CII
MMC 320 from Forward No
MMC 210 (Page 5 of 5)
MMC PROGRAM
FEBRUARY 2004
816 408/408i iDCS
408i only
OS500