Samsung DCS Programming Manual page 138

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 321
FOR: iDCS500 ('L' version only)
Purpose: Assigns each display keyset as DISPLAY or NON-DISPLAY. In order to be able
to use the Text Messaging feature, a display keyset must be programmed as a DISPLAY
keyset. The Text Messaging feature allows two programmed DISPLAY keysets to send text
messages between them when one is attempting to camp-on a call or voice announce to the
other when the latter is busy.
ACTION
1. Open programming and select 321
Display shows
2. Dial station number (e.g., 205)
OR
Press VOLUME keys to select station and
press RIGHT soft key to move cursor
OR
Select all stations
3. Press VOLUME keys to select DISPLAY or
NON DISPLAY and press RIGHT soft key
4. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to save and advance to next
MMC
Default Data:
Related Items:
(see section 1.5.2)
NON-DISPLAY
MMC 715 Programmed Station Message
MMC 115 Set Programmed Message
MMC 321 (Page 1 of 1)
MMC PROGRAMS
FEBRUARY 2004
KEYSET TYPE
DISPLAY
[201] KTS TYPE
NON DISPLAY
[205] KTS TYPE
NON DISPLAY
[205] KTS TYPE
DISPLAY