Samsung DCS Programming Manual page 234

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 700
FOR:
Purpose: Copies a selected class of service (COS) to another COS. This is useful, for
example, if you want to create a similar COS to that being copied but also want to
change a few selected options. This MMC allows you to enter MMC 701, Assign COS
Contents, in order to make any changes you require. If you want to create a completely
new COS, use MMC
ACTION
1. Open programming and select 700
Display shows
2. Dial selected COS to copy (e.g., 05)
OR
Press VOLUME keys to select COS and press
RIGHT soft key to move cursor
3. Dial target COS (e.g., 06)
OR
Press VOLUME keys to select COS and press
RIGHT soft key to move cursor back to step 2
4. To make changes to COS options, press
to advance to
OR
Go to step 5 if no changes are required
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
ALL SYSTEMS
701.
MMC 701
None
MMC 701 Assign COS Contents
MMC 700 (Page 1 of 1)
COPY COS CONTENTS
DISPLAY
COPY COS ITEMS
COS 01 → COS 01
COPY COS ITEMS
COS 05 → COS 01
COPY COS ITEMS
COS 05 → COS 06
"F" key
COS CONTENTS(06)
TOLL LEVEL:A
MMC PROGRAMS
FEBRUARY 2004