Samsung DCS Programming Manual page 166

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 419
FOR: DCS CI CII
Purpose: This MMC comprises two groups of options. One group is for the "TRUNK"
ports and the other is for the "STATION" ports as set in
that some options may not be available on your system.
Note:
1 For each BRI access, two adjacent ports are assigned. You need only change the value for
one of the two ports; the value for the other port will be changed automatically.
2 If changes are made using this MMC, the BRI card affected must be restarted using
418, Card Restart.
Ports Programmed as "TRUNK" in MMC 423
Display shows "BRI-TRK". Items to select include some or all of the following: CHANNEL
ANY, BRI MODE, DLSEND, BRI CODING, CLIP TABLE and NB TYPE.
• CHANNEL ANY
This field can be set to YES or NO and is referenced when a user attempts an outgo-
ing call while that port is busy.
If CHANNEL ANY is NO, the user hears busy tone.
If CHANNEL ANY is YES, the system checks if the adjacent port (another B channel
in the same BRI access) is free. If it is free, the user can call through that port. Oth-
erwise, the user hears busy tone.
• BRI MODE
P-P DDI:
P-M NOR:
P-M MSN:
P-P NOR:
• DLSEND
This field is provided to set the dial sending mode to "enblock" or "overlap" on an in-
dividual port basis. If enblock, digits are sent in a single block; if overlap, digits are
sent as they dialled.
816 408i iDCS100
When BRI line is point-to-point configuration and is a DDI line. Incoming
calls are placed as set in
All incoming calls through the DDI trunk will be placed according to the
setting of the DDI table.
When BRI line is point-to-multipoint configuration and is not an MSN line
Incoming calls are placed as set in
When BRI line is point-to-multipoint configuration and is an MSN line.
The system can manage up to eight MSN numbers for each MSN BRI
access. Incoming calls through P-MP MSN ports are handled as set in
MMC 421 (MSN Digit). Each BRI access requires its own table.
When BRI line is point-to-point configuration and is not a DDI line. In-
coming calls are placed as set in
MMC 419 (Page 1 of 3)
BRI OPTIONS
iDCS500 OS500
MMC 423, S/T
MMC 714 (DDI Number & Name
MMC 406 (Trunk Ring Assignment)
MMC 406 (Trunk Ring Assignment).
MMC PROGRAMS
FEBRUARY 2004
Mode. Be aware
MMC
Translation).