Samsung DCS Programming Manual page 219

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 604
FOR:
Purpose: Assigns a keyset to any or all of the internal paging zones. The total number of
keysets that can receive a page is limited to:
DCS
80
For all systems except iDCS and OS500
If a keyset is flagged as "1" in a zone column, it will receive pages for that zone. If the keyset is
flagged as "0," it will not receive pages for that zone. If "∗" is set as "1", a keyset will receive pages
for all zones.
408/408i systems are assigned internal page zones 1–2 only. Therefore, only these zones can be
flagged as "1". Zones 3 and 4 are flagged as "0".
ACTION
1. Open programming and select 604
Display shows
2. Enter number (01–80 or 01–40 or 01–12 or 1–4
depending on your system–see above) e.g., 04
OR
Press VOLUME keys to make selection and press
RIGHT soft key to move cursor
3. Enter station number (e.g., 205)
OR
Press VOLUME keys to make selection and press
RIGHT soft key to move cursor
4. Move cursor under page zone desired (e.g. 2) by
pressing VOLUME keys and enter the digit 1 under
the zone
Press RIGHT soft key to return to step 2 to
continue with entries
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
ALL SYSTEMS
CII 816 408/408i
40 12 4
No stations assigned
All zone ("∗") is set ("1")
None
MMC 604 (Page 1 of 2)
ASSIGN STATION TO
PAGE ZONE
iDCS100 iDCS500 & OS500
40
DISPLAY
ENTRY:STN :1234∗
01:NONE: 00001
ENTRY:STN :1234∗
04:NONE: 00001
ENTRY:STN :1234∗
04:205
ENTRY:STN :1234∗
04:205
MMC PROGRAMS
FEBRUARY 2004
99
:00001
:01001