Samsung DCS Programming Manual page 187

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
OFF HOOK SELECT
OHVA ANSWER
OVERLAP INT DGT
PAGE TIME OUT
PAGE TONE
PARK RECALL
PC-MMC LOCK
PERI UCD REPORT
POWER DOWN
RECALL DISCONNECT
RECALL WAIT
SMDR START/DP
SMDR START/DTMF
ROUTE OPTIMISE
SYS HOLD RECALL
TRANSFER RECALL
TSW CONN. DELAY
UCDS AUDIO ALARM
UCDS VISUAL ALARM
VMS UCD MSG
VOICE DIAL DELAY
VOIP RE-ROUTE
R/D RING ON
(not used)
R/D SIGNAL ON
(not used)
AA INT DGT: Controls the grace period between dialling valid digits before transferring call to INVLID
DEST as set in MMC 733
AA NO ACT: Time AA will wait for first digit for processing, after which call is transferred to the desti-
nation set in NO ACT DEST in
AA TRANS: After this time, compare input digit with AA translation table
destination.
ALARM: The time after which the System Alarm key will start ringing again when it has been silenced
(iDCS500 'L' and OS500 systems only).
ALERT TONE: Sets the duration of the attention tone preceding a call to a keyset in the Voice An-
nounce or Auto Answer mode. This tone also precedes a forced Auto Answer call.
ALM REM INTERVAL: Controls the time between ring attempts at a station when alarm reminder is
set.
ALM REM RING OFF: Controls the length of the ring cycle when alarm reminder is set at a station.
ATT RECALL: The length of time a transfer recall will ring at a station before recalling the operator.
AUTO REDIAL INT: Controls the time between attempts after RETRY dialling is set on a station.
AUTO REDIAL RLS: Controls the duration of a Ring No Answer condition on a retry number dialled
before the auto redial is automatically cancelled.
BARGE-IN TONE INT: Controls the interval between the tones sent to the station being barged in on.
Timer Descriptions
on a per-plan basis.
MMC 733.
MMC 501 (Page 3 of 6)
5 SEC
10 SEC
7 SEC
20 SEC
500 MS
45 SEC
5 MIN
5 SEC
2000 MS
2 MIN
15 SEC
30 SEC
15 SEC
010 SEC
45 SEC
20 SEC
00 SEC
0 SEC
0 SEC
5 SEC
8 SEC
5 SEC
–
–
(MMC
MMC PROGRAMS
FEBRUARY 2004
1–250 SEC
1–250 SEC
1 - 15 SEC
1–250 SEC
100–2500 MS
0–250 SEC
1–60 MIN
3–99 SEC
1000–9900 MS
1–255 MIN
1–250 SEC
1–250 SEC
1–250 SEC
0–250 SEC
0–250 SEC
0–250 SEC
0–10 SEC
0–250 SEC
0–250 SEC
1–99 SEC
5–15 SEC
02–25 SEC
–
–
732) and transfer to