Samsung DCS Programming Manual page 252

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 709
FOR:
Purpose: Sets codes and numbers valid for the following options:
0 PBX CODE
Identifies the access codes needed to work toll restriction (call barring) when the system
is used with either a PBX or CENTREX-supplied dial tone (PBX ACCESS CODE option).
A maximum of five entries is allowed (two for 408/408i systems). Toll restriction is ap-
plied only to trunks flagged as PBX in
1 SPECIAL CODE
Identifies the access codes needed to work toll restriction when operating special C.O.-
provided functions (SPECIAL CODE option)—a maximum of 10 entries is allowed, each
up to four digits.
iDCS & OS500 systems also provide the following options:
2 TOLL OVERRIDE
This table of eight entries is used to identify numbers that will bypass all dialling restric-
tions including toll restriction, trunk access and forced authorisation and account codes.
Each entry in the table can be up to 14 digits long.
3 OVRD USE TRK GRP
Designates the trunk group to use if a toll override number is dialled.
ACTION
1. Open programming and select 709
Display shows
2. Dial option 0 or 1 (or 0–3 for iDCS) e.g. 0
OR
Press VOLUME keys to make selection and press
RIGHT soft key to move cursor
3. Enter code index number (e.g., 2)
OR
Press VOLUME keys to make selection
Press RIGHT soft key to move cursor
4. Enter the desired access/feature code (max. 4
digits, e.g., 9)
TOLL PASS CODE
ALL SYSTEMS
MMC 401 when these codes are dialled.
MMC 709 (Page 1 of 2)
MMC PROGRAMS
FEBRUARY 2004
DISPLAY
PBX ACCESS CODE
1:
PBX ACCESS CODE
1:
PBX ACCESS CODE
2:_
PBX ACCESS CODE
2:9