Samsung DCS Programming Manual page 69

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 120
FOR: OS500
Purpose: Sets option selections for large LCD phones (ITP/DS-5012L).
Option
0 IDLE DISP
1 DS KEY DSP
2 DIAL MODE
3 CONV DISP
ACTION
1. Open programming and select 120
Display shows
2. Enter keyset number (e.g. 204)
OR
Press VOLUME keys to scroll through stations and
press RIGHT soft key to select a station
OR
Select all stations
3. Dial display option 0–3 (e.g. 1)
OR
Press VOLUME keys to select option and press
RIGHT soft key
4. Press VOLUME keys to select display type and
press RIGHT soft key
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to save and advance to next
MMC
Selection
Display CALENDAR or INFORMATION when phone is in idle
state
Display extension name (EXT NAME) or number (TEL NUM-
BER) of Direct Station Selection buttons on LCD
Set OVERLAP or ENBLOC mode
SOFT MENU FIRST
If selected, features assigned to keys are displayed when
key is pressed while on a call.
SCREEN
AOM KEY FIRST
If selected, extensions assigned to keys are displayed when
key is pressed while on a call.
SCREEN
(see section 1.5.2)
MMC 120 (Page 1 of 2)
MMC PROGRAMS
FEBRUARY 2004
LARGE OPTION
DISPLAY
[201] IDLE DISP
CALENDAR
[204] IDLE DISP
CALENDAR
[ALL] IDLE DISP
CALENDAR
[204] DS KEY DSP
EXT NAME
[204] DS KEY DSP
TEL NUMBER