Samsung DCS Programming Manual page 249

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 706
FOR:
Purpose: Allows a name, up to 11 characters, to be entered for each system speed dial
number you set up in
ing the directory dial feature. The directory dial feature allows the display keyset user to
select a speed dial number by searching for the name.
Names are written using the keypad. Each key press moves the cursor and enters the
selected character.* For example, if the name is "SAM SMITH", press the number "7"
four times to get the letter "S". Now press the number "2" once to get the letter "A" Con-
tinue selecting characters from the keypad to complete your name. Press the program-
mable "A" key to toggle between upper and lower case text. (Refer to
Part 1 for key descriptions.)
* Tip: When the character you want is on the same key as the previous character you typed in,
press the VOLUME UP key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
# space &
[ ] @
The "F" key can be used to toggle to MMC 705 during programming.
ACTION
1. Open programming and select 706
Display shows
2. Dial system speed entry number (e.g., 505)
OR
Press VOLUME keys to select entry number
and press RIGHT soft key to move cursor
3. Enter name using dial keypad and press RIGHT
soft key to return to step 2
OR
Press the "F" key to return to
OR
Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
SYSTEM SPEED DIAL BY NAME
ALL SYSTEMS
MMC 705. This name enables the number to be located when us-
! : ? .
^ ( ) _
MMC 705
No names
MMC 606 Assign Speed Block
MMC 705 Assign System Speed Dial
MMC 706 (Page 1 of 1)
, % $ -
+ { } |
DISPLAY
SYS SPEED NAME
500:
SYS SPEED NAME
505:
SYS SPEED NAME
505:TELECOMS
SYS SPEED DIAL
505:
MMC PROGRAMS
FEBRUARY 2004
section 1.5.2 in
< > / =
→
; " `