Samsung DCS Programming Manual page 379

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
URQ REASON
MODE
RRQ FAIL TIME
GRQ SEND
ACTION
1. Open programming and select 836
Display shows
2. Press VOLUME keys to select ITM3/MGI card
and press RIGHT soft key
3. Press VOLUME keys to select option and press
RIGHT soft key
4. Press VOLUME keys to select option and press
RIGHT soft key
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
When Gatekeeper sends URQ message to Gateway, the Gateway dis-
ables the Gatekeeper connection according to the reason code.
The transfer cycle of RRQ when failure occurs while transferring RRQ
from Gateway to Gatekeeper.
Sets whether Gateway shall send the GRQ message.
GK CONNECT:
GK ROUTING:
GK IP ADDR:
GK NAME:
ALTER GK IP
ADDRESS:
H.323 GATEWAY ID: None
E.164 GATEWAY NO: None
GK KEEP ALIVE:
GK DOWN ROUTE:
GK RAS TYPE:
URQ REASON MODE: ON
RRQ FAIL TIME:
GRQ SEND:
MMC 831 VoIP Parameters
MMC 832 VoIP Code
MMC 833 VoIP IP Table
MMC 834 VoIP Option
MMC 835 VoIP DSP Option
MMC 836 (Page 2 of 2)
DISPLAY
[7001]GK CONNECT
G.723.1
[7001]GK CONNECT
G.723.1
[7001]GK TYPE
SIGK
[7001]GK TYPE
OTHER SIGK
DISABLE
DISABLE
0.0.0.0
None
0.0.0.0
000 sec
PSTN
AUTO
30 sec
OFF
MMC PROGRAMS
FEBRUARY 2004