Samsung DCS Programming Manual page 272

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 720
FOR:
Purpose: For duplicating key assignments from one keyset to another. This can be
done on a per-station basis or on all stations, but not on a group of stations.
Important: a DCS (Euro) keyset can only be copied to another Euro keyset, a 5000 se-
ries keyset to another 5000 series keyset, and an iDCS keyset to another iDCS keyset.
A limitation is that the original and target keysets must have the same number of keys,
e.g. both are 24-button keysets or both are 12-button keysets.
ACTION
1. Open programming and select 720
Display shows
2. Enter the station number to copy to (e.g., 205)
OR
Press VOLUME keys to make selection and
press RIGHT soft key to move cursor
3. Enter station number to copy from (e.g., 203)
(Cursor returns to step 2)
OR
Press VOLUME keys to make selection
4. Press RIGHT soft key to return to step 2
OR
Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
COPY KEY PROGRAMMING
ALL SYSTEMS
None
MMC 107 Key Extender
MMC 721 Save Station Key Programming
MMC 722 Station Key Programming
MMC 723 System Key Programming
MMC 720 (Page 1 of 1)
MMC PROGRAMS
FEBRUARY 2004
DISPLAY
[201] COPY KEY
FROM:NONE
[205] COPY KEY
FROM:NONE
[205] COPY KEY
FROM:203