Samsung DCS Programming Manual page 287

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
7 PROGRESS TONE ID
Note: For DCS and CII, the call progress tones will automatically be set to the default values if the SMDI
VMS SET option in MMC 210
FEATURE KEYS
"A" Insert DTMF digit "A"
"B" Insert DTMF digit "B"
"C" Insert DTMF digit "C"
(Refer to section 1.5.2 in Part 1
ACTION
1. Open programming and select 726
Display shows
2. Enter the option number from above list (e.g., 4
— for other options, see steps 4 to 11)
OR
Press VOLUME keys to make selection
Press LEFT soft key to move cursor
3. Enter 1 for YES or 0 for NO
OR
Press VOLUME keys for selection
Press RIGHT soft key to return to step 2
4. If option 0 is selected at step 2
5. If option 1 is selected at step 2
6. If option 2 is selected at step 2
7. If option 3 is selected at step 2
DTMF digits can be sent in place of normal system
tones. Digits can be assigned to the following tones:
TONES
0. DIAL TONE
1. BUSY TONE
2. RINGBACK TONE
3. DND NO MORE
4. HDSET ANSWER
5. SPKER ANSWER
is set ON.
for key descriptions.)
MMC 726 (Page 2 of 3)
MMC PROGRAMS
FEBRUARY 2004
DISPLAY
EXT FOR DN1
YES
SEPARATOR
NO
SEPARATOR
YES
EXT FOR DN1
YES
TRK FOR DN1
YES
EXT FOR DN2
NO
TRK FOR DN2
NO