Samsung DCS Programming Manual page 75

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 200
FOR:
Purpose: Opens (enables) or closes (disables) customer-level programming.
If programming is not opened and an attempt is made to access a customer-level MMC,
the error message [NOT PERMIT] will be displayed. A four-digit passcode is required to
enable customer programming (by default this is 1234, but can be changed in
if required). Each digit can be 0–9. When opened, this MMC allows access to all MMCs
specified by the system installer in
ACTION
1. Press Transfer/TRSF 200
Display shows
2. Enter passcode
Correct code shows
Incorrect code shows
3. Dial 1 for ENABLE or 0 for DISABLE
OR
Press VOLUME keys to select ENABLE or DIS-
ABLE and press RIGHT soft key
4. Press SPEAKER to advance to MMC entry level
and press VOLUME keys to select MMC (e.g.
212)
OR
Enter MMC number and press RIGHT soft
key to enter MMC
5. Press Transfer/TRSF to exit
Default Data:
Related Items:
ALL SYSTEMS
MMC 802, Customer Access MMC
DISABLE (closed)
Passcode=1234
MMC 201 Change Customer Passcode
MMC 501 System-Wide Timers
MMC 802 Customer Access MMC Number
MMC 200 (Page 1 of 1)
OPEN CUSTOMER
PROGRAMMING
DISPLAY
ENABLE CUS.PROG.
PASSCODE:_
ENABLE CUS.PROG.
PASSCODE:
ENABLE CUS.PROG.
DISABLE
ENABLE CUS.PROG.
PASSWORD ERROR
ENABLE CUS.PROG.
ENABLE
212:ALARM RING
SELECT PROG. ID
MMC PROGRAMS
FEBRUARY 2004
MMC 201,
Number.