Samsung DCS Programming Manual page 140

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 400
FOR:
Purpose: Assigns the following options on a per-trunk basis. Some options may not be
available on your system.
OPTIONS
1A2 EMULATE*
TRUNK INC DND
TRUNK FORWARD
LCR ALLOW
EFWD EXT CLI
REPEAT CLI
* Note: '1A2 Emulate' means that other stations (up to a total of four) can join an existing trunk
conversation by pressing the DTS key for the trunk on their keyset
ACTION
1. Open programming and select 400
Display show
2. Dial trunk number (e.g. 704)
OR
Press VOLUME keys to select trunk and press
RIGHT soft key to move cursor to options
OR
Select all trunks
3. Press VOLUME keys to select option and press
RIGHT soft key to move cursor
ALL SYSTEMS
Trunk override call (NO PRIVACY)
Allows trunk to override DND (DIL)
Allows trunk to be forwarded
Allows LCR to be switched ON/OFF when a trunk is
directly accessed.
External forward external CLI number (on/off).
Set OFF:
If incoming external call includes CLI, this is sent to the ex-
ternal forward destination. If incoming external call does not
include CLI, the CLI number of the forwarding station is sent
to the external forward destination.
Set ON:
Only the CLI number of the forwarding station is sent to the
external forward destination.
When a Trunk to Trunk call is made, the incoming CLI will be
used as the outgoing CLI.
(see section 1.5.2)
MMC 400 (Page 1 of 2)
CUSTOMER ON/OFF
PER TRUNK
DISPLAY
[701] TRK ON/OFF
1A2 EMULATE:OFF
[704] TRK ON/OFF
1A2 EMULATE:OFF
OR
[ALL] TRK ON/OFF
1A2 EMULATE :?
[704] TRK ON/OFF
TRK FORWARD :ON
MMC PROGRAMS
FEBRUARY 2004