Samsung DCS Programming Manual page 188

SAMSUNG MMC PROGRAMS
COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004
BOOTH TIME OUT: Controls the time for which a booth phone is enabled (Hotel application).
CALLBACK NO ANS: Controls the time before the callback is automatically cancelled when a call-
back detects Ring No Answer.
CAMP ON RECALL: Controls how long a camped-on call will stay at a destination before recalling to
the transferring station.
CLIP DISPLAY: The amount of time that the Calling Line ID information remains on the keyset's dis-
play. While on a trunk conversation, users are allowed to review received CLIP by pressing SCROLL
key CLIP soft key. LCD will automatically go back to trunk conversation status on expiration of this
timer.
CLIP MSG RECEIVE: The amount of time that the system will allow a valid message from the C.O.
C.O. CLEAR: The length of time a Direct Trunk Select key remains busy after cleardown.
CO CONFIRM: After this time, the outgoing call is disconnected or you hear the confirm tone.
C.O.- C.O. DISCONNECT: Monitors the duration of an unsupervised conference; when it expires,
both trunks are disconnected.
CONFER TONE INT: Controls the intervals between the tones heard by the parties in a conference.
CONFIRM TONE: The tone heard when a feature is activated or deactivated.
CRD TONE INT: Controls the interval of the intermittent tone presented to station users whose calls
are being recorded using the Auto Record feature (see Voice Mail documentation).
DIAL PASS: The wait time for preventing the misdialling of an outgoing call. After the last digit has
been dialled, the voice path is connected.
DISA DISCONNECT: Controls the maximum duration of a DISA call.
DISA LOCK OUT: Controls the time period for which a DISA call is not allowed to be made after the
DISA error counter has expired (MMC 500).
DISA NOANS DISC: Controls the time period after which a DISA call is disconnected if the call is not
answered.
DISA PASS CHECK: Defines the time period before the system clears the incorrect passcode
counter.
DISPLAY DELAY: Controls how long information is shown in the LCD. This timer also controls how
long error tone is heard.
DOOR LOCK RELEASE: Controls how long the door lock relay is activated.
DOOR RING DETECT: Controls the period of time before a call is answered by the door phone.
DOOR RING OFF: Controls the duration of ringing at the door ring destination before automatically
cancelling.
E-HOLD RECALL: Controls how long a call is held exclusively at a station before recalling. See ATT
Recall timer.
EXT. FWD DELAY: Controls how long a station set to External Call Forward will ring before the call is
placed on external call forwarding. (iDCS and OS500 systems use the EFWD DELAY feature in MMC
502.)
MMC 501 (Page 4 of 6)