Samsung DCS Programming Manual page 48

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 107
FOR:
Purpose: Views programmed key assignments and assigns extenders to program-
mable keys on keysets. (Extenders may also be entered in
when programming key assignments.)
You assign key extenders to those programmed keys which can have extenders to
make general access feature keys more specific. For example, you may want to set a
Speed Dial key to dial personal speed dial code 01 when selected (
key to page zone 1 only (
PAGE
are listed in the table over the page.
ACTION
1. Open programming and select 107
Display shows
OR
For 408 and 408i systems, display shows:
2. Dial keyset number (e.g., 205)
OR
Press VOLUME keys to scroll through keyset
numbers and press RIGHT soft key to move the
cursor
3. Enter key number (e.g., key 18)
OR
Press VOLUME keys to scroll through and select
key and use RIGHT soft key to move the cursor
OR
Press programmed key
4. Use table below to select extender (e.g. 207)
System returns to step 3
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Note: If the RIGHT soft key will not move the cursor to the right, you are attempting to add an ex-
tender to a key that cannot have one.
Default Data:
Related Items:
ALL SYSTEMS
PAGE1
None
MMC 720 Copy Key Programming
MMC 721 Save Station Key Programming
MMC 722 Station Key Programming
MMC 723 System Key Programming
MMC 107 (Page 1 of 3)
KEY EXTENDER
). The feature keys that can have extenders
DISPLAY
[201] EXT (MAST)
01:CALL1 →
OR
[21] EXT EXTEND
01:DT71 →
[205] EXT (MAST)
01:CALL1 →
[205] EXT (MAST)
18:DS
205] EXT (MAST)
18:DS
MMC PROGRAMS
FEBRUARY 2004
MMC 722 or MMC 723
) or set a
SPD01
→ DS_
→DS207