Samsung DCS Programming Manual page 216

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 602
FOR:
Purpose: Enters a name, up to 11 characters, to identify an individual station group.
Names are written using the keypad. Pressing a key selects a character and moves the
cursor to the next position. For example, if the name is "SAMSUNG," press the number
"7" four times to get the letter "S." Now press the number "2" once to get the letter "A."
Continue selecting characters from the keypad to complete the name. Press the pro-
grammable "A" key
in Part 1 for key descriptions.)
Tip: When the character you want is on the same key as the previous character you typed in,
press the VOLUME UP key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
# space &
[ ] @
ACTION
1. Open programming and select 602
Display shows
2. Dial group number (e.g., 505)
OR
Press VOLUME keys to make selection and press
LEFT or RIGHT soft key to move cursor
3. Enter the name using method described above
4. Press LEFT or RIGHT soft key to return to step 2
OR
Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
STATION GROUP NAME
ALL SYSTEMS
to toggle between upper and lower case text. (Refer to
! : ? .
^ ( ) _
None
MMC 104 Station Name
MMC 404 Trunk Name
MMC 600 Assign Operator Group
MMC 601 Assign Station Group
MMC 602 (Page 1 of 1)
, % $ -
+ { } |
DISPLAY
[500] SGR NAME
[505] SGR NAME
_
[505] SGR NAME
SAMSUNG
MMC PROGRAMS
FEBRUARY 2004
section 1.5.2
< > / =
→
; " `