Samsung DCS Programming Manual page 254

SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 710
FOR:
Purpose: The LCR DIGIT TABLE contains all numerical digits for the completion of out-
going call placement. This table works in conjunction with
MMC 712 (LCR Route
Maximum number of entries is:
DCS & CII 816
500 300
Digit string length is 10 digits. This system automatically maintains entered digit strings in
numerical order. The characters
ACTION
1. Open programming and select 710
Display shows
2. Dial LCR entry (e.g., 005 or 0005)
OR
Press VOLUME keys to select entry and press
RIGHT soft key to move cursor
3. Enter LCR digit string and press RIGHT soft key
OR
Press LEFT soft key to return to step 1
4. Enter digit length 00–31
Cursor will move to RT (route selection)
Enter RT 01 to 16 (or 32)
OR
Press LEFT soft key to return to length value
Valid entry will return you to step 1
5. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
ALL SYSTEMS
Table), and MMC 713 (LCR Modify Digit
408 & 408i iDCS100
100 1000
and # can be used with feature codes.
Depends on software version
MMC 210 Customer On/Off
MMC 400 Customer On/Off Per Trunk
MMC 711 LCR Time Table
MMC 712 LCR Route Table
MMC 713 LCR Modify Digit Table
MMC 710 (Page 1 of 1)
LCR DIGIT TABLE
MMC 711 (LCR Time Table),
iDCS500 'M' iDCS500 'L'
1000 2000
DISPLAY
LCR DIGIT (001)
DIGIT:
LCR DIGIT (005)
DIGIT: _
LCR DIGIT (005)
DIGIT:305426
LCR DIGIT (005)
LENGTH:10 RT:01
MMC PROGRAMS
FEBRUARY 2004
Table).
OS500
2000